精品熟女60老妇av免,欧美午夜,中文字幕无码一区二区三区亚洲,女人av天堂

The steel wire rope equipment conveyor belt has the following characteristics compared with other types of conveyor belts

Release time:

2023-03-14

Wire rope equipment conveyor belt and other types of conveyor belt comparison has the following characteristics: 1. The compressive strength of the large-scale practical application of the wire rope equipment core conveyor belt has reached 8400N/mm. When necessary, the belt strength can exceed 10000N/mm. 2. The safety performance of wire rope equipment core conveyor belt selection is compared with textile core conveyor

The steel wire rope equipment conveyor belt has the following characteristics compared with other types of conveyor belts

Wire rope equipment conveyor belt and other types of conveyor belt comparison has the following characteristics:

1. The compressive strength of the steel wire rope core conveyor belt has reached 8400N/mm. When necessary, the belt strength can exceed 10000N/mm.

2. The safety performance of the steel wire rope core conveyor belt is lower than that of the textile core conveyor belt. The safety performance of the textile core conveyor belt is generally 10 or above 10, while the steel wire rope equipment core conveyor belt must be 6-7. If the connector is effective and the transportation start is effective, it can be reduced to 5.

3 The steel wire rope core conveyor belt is suitable for intelligent transportation with long distance, large transportation volume and high speed operation. It can clean or reduce transportation points. The damage of adhesive tape and the damage of output power are relatively small.

鋼絲繩設(shè)備

4. The elongation of the steel wire rope core conveyor belt is small and the tension stroke arrangement is short.


5. The steel wire rope core conveyor belt has high cost performance and strong parallel line operation, and can transport more raw materials with the same network bandwidth and belt speed.


6. The steel wire rope core conveyor belt has good dynamic performance and can be used to conveyor iron ore with high net weight and larger lumpiness. The steel wire rope equipment is laid in plastic particles. During the vulcanization process of plastic particles, the steel wire rope equipment is encapsulated, infiltrated and bonded with plastic particles, resulting in a stable combination with plastic. Its impact resistance and service life exceed that of the textile core belt. If a horizontal raising layer is added, greater impact resistance can be obtained.


7. The interface of the steel cord conveyor belt can have the same compressive strength and service life as the belt.


Wire rope conveyor belt is a common conveyor belt in the coal mining industry, because it has a wire rope equipment core with high compressive strength and small shrinkage, which can meet the needs of long-distance, high-speed operation and large transportation volume. At the same time, the cost of wire rope equipment conveyor belt is also very high, so it is very important to maintain the smooth and safe work of wire rope equipment conveyor belt.


The paving length of the steel wire rope equipment conveyor belt is very long, and the thickness is 2-3 times that of the general conveyor belt, while the steel wire rope equipment conveyor belt is generally 100m a roll, so a belt conveyor needs a multi-roll steel wire rope equipment conveyor belt head-to-tail connection to form a ring.


The connection method of the steel wire rope equipment conveyor belt is hot vulcanization connection, and the steel wire rope equipment and plastic are bonded together by plastic particles. However, in the process of vulcanization, occasionally affected by the natural environment, construction environment, processing technology and other factors, the compressive strength of the connector can not reach the strength of the conveyor belt itself, probably in the middle of 70% to 95%.


The steel wire rope equipment conveyor belt is composed of core glue, cover glue, longitudinally arranged steel wire rope equipment and edge glue. This kind of structural steel wire rope equipment has good appeal to plastic. Usually, the surface of steel wire rope equipment is galvanized or electroplated with copper. The plastic particles used in the connector are the same as the original conveyor belt. Otherwise, there will be cracks at the junction of two different plastic particles with considerable probability, and moisture and residue will enter the internal structure of the conveyor belt, erosion of wire rope equipment, thereby affecting the compressive strength of the connector.